User's Tip 4: USING AND STORE BATTERY

Using Battery:

• Don’t put Battery at high degree place to prevent overheat.
• Put the Battery at the dry and firmly flat place.
• Don’t make the battery short circuit as: let the conductor connect 2 poles of Batetry.
• Don’t put the Battery near the corrosion chemicals.
• Don’t put sharps, don’t overlap, or put other things on the battery.
• Note: The maximum exhaust flow is not greater than 3 times the battery capacity and operating time in this mode is not more than three consecutive minutes.If don’t use car/motor for a long time, over 1 month, please check battery capacity and recharge by charger (include dry battery)

Store Batetry:

• Checking the cracked on the cover or container (especially around the poles area. This place get a high force when remove or installing connect cable). Change the battery if battery have any cracked.
• Checking connect cable. Change the new cable if need.
• Checking the poles. Ensure the connect between connect cable and two poles steady (warning: when cleaning the poles. Don’t let 2 poles touch through screwdriver, wrench)
• Always checking electrolyte water in the Battery. Ensure electrolyte water level according to instruction of Battery manufacturer (for the Acid battery).
• For MF Batetry, checking through magic eye: Green: Good, Black/White: Need recharge, Red: Request to change new battery.